Publications

EPSRC Centre for Through-Life Engineering Services

Papers since June 2015                         

Project: Reduction of No-Fault (NFF) Through System Design
Journal:
Sedighi T. et al., Feed-forward observer-based intermittent fault detection. Has been submitted to “Special issue on advanced M&T for TES (CIRPJ) Journal”. (Under review)

Sydor P. et al., (preliminary title – paper in preparation) Benchmarking tool to unhide the real cause of NFF within complex systems. IEEE Transactions on Engineering Management.

Ahmad S. W. et al., A Novel Intermittent Fault Detection Algorithm and Health Monitoring for Electronic Interconnections. (IEEE transaction on components and packaging)

Ahmad S.W. et al., A Carrier Signal Approach for Intermittent Fault Detection and Health Monitoring for Electronics Interconnections System (IJACSA).

Sedighi T. et al., Nonlinear unknown input observer design for systems with unmatched uncertainties to detect the intermittent faults. Will be submitted to “, Journal of Control Engineering and Applied Informatics”.

Sedighi T. et al., An intermittent fault diagnosis methodology for an experimental fuel rig based on dynamic Bayesian networks. Will be submitted to: “Quality and Reliability Engineering International Journal”.

Book:
S Khan, P.Phillips, C. Hockley, I.K. Jennions  ‘No Fault Found:  The Search for the Root Cause.’  SAE International.  ISBN-Print  978-0-7680-8122-0

Project: Characterisation of “In-Service” Component Feedback for System Design and Manufacture
Journals:
F. Bar, D. Gagar, P. Foote, Y. Zhao, “Comparison of alternatives to amplitude thresholding for onset detection of acoustic emission signals”, Mechanical Systems and Signal Processing (IF: 2.256), submitted

S. Amrogowicz, Y. Zhao, Y. Zhao, “An Edge Detection Method using Outer Totalistic Cellular Automata”, Neurocomputing (IF:2.083), submitted

W. Witwit, K. Jenkins and Y. Zhao, “Identification of Important Factors Related to Performance Assessment for Wavelet-based Still Image Resolution Enhancement Techniques”, IEEE Transactions on Image Processing (IF:3.625), submitted

Zhao, Y., Addepalli, S., Tinsley, L., Mehnen, J., Roy, R., “Development of an automated inspection cell for industrial damage detection”. (Target Journal: Infrared Physics & Technology – Elsevier)

Morar, N., Roy, R., Mehnen, J., Marimuthu, S., Harrison, A., “ Investigating Recast and Microcracks Formation During Laser Trepanning Drilling of Acute Holes in Nickel Superalloys”. (Target Journal: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture)

Morar, N., Roy, R., Mehnen, Gray, S., Nicholls, J., Harrison, A., “Degradation of Corrosion-Fatigue Life in Ni-base Superalloy Due to Laser Drilling Operations”. (Target Journal: International Journal of Fatigue – Elsevier)

Okoh, C., Roy, R., Mehnen, J., “Predicting Remaining Life of Mechanical Components for Through-life Engineering Services”. (Target Journal: Computer Integrated Manufacturing)

Okoh, C., Roy, R., Mehnen, J., Harrison, A., “Taxonomic Historical Knowledge Capture of degradation mechanisms in Through-life Engineering Services”. (Target Journal: Knowledge and Information Systems)

Okoh, C., Roy, R., Mehnen, J., Harrison, A., “Component Current Health State Capture in Through-life Engineering Services”. (Target Journal: Knowledge and Information Systems)

Tinsley, L., Roy, R., Mehnen, J., “An overview of Pulsed-active thermography for Thermal Barrier Coatings”. (Target Journal: Infrared Physics & Technology – Elsevier)

Tinsley, L., Mehnen, J., Zhao, Y., “Selection of data capture and analysis parameters for pulsed thermography of TBCs”. (Target Journal: Infrared Physics & Technology – Elsevier)

Tinsley, L., Chalk, C., Harrison, A., Addepalli, S., Roy, R., Mehnen, J., “Application of pulsed thermography to thin Thermal Barrier Coatings ageing assessment”. (Target Journal: Quantitative Infra-Red Thermography (QIRT))

Kakandar, E., Roy, R., Mehnen, J., “1-    Methodologies for fatigue life degradation assessment of machine components- An overview”. (Target Journal: Journal of Mechanical Engineering Science)

Kakandar, E., Roy, R., Mehnen, J., “A study of design and manufacturing influence on thermal fatigue life of a brake disc”. (Target Journal: Journal of Mechanical Engineering Science)

Project: Improvement of System Design Process for Whole Life Cost Reduction
Journals:
Erkoyuncu, J.A., Durugbo, C., (2016), “Mitigating Uncertainty for Industrial Service Operations: A Multi Case Study”, International Journal of Operations & Production Management. Accepted.

Schwabe, O., Shehab, E., Erkoyuncu, J.A. (2015) “Uncertainty Quantification Metrics for Whole Product Life Cycle Cost Estimates in Aerospace Innovation”, Journal Progress in Aerospace Sciences, pp. 1-24, DOI: 10.1016/j.paerosci.2015.06.002, Retrieved August 4th, 2015 from http://www.sciencedirect.com/science/article/pii/S0376042115000433

Masood, T., Erkoyuncu, J., A., Roy, R., Harrison, A. (2014) “Integrating design attributes, knowledge and uncertainty in aerospace sector” CIRP Journal of Manufacturing Science and Technology, 7(2), pp. 83–96.

Erkoyuncu, J. A., Durugbo, C., Shehab, E., Roy, R., Parker, R., Gath, A. and Howell, D. (2013) “Uncertainty driven service cost estimation for decision support at the bidding stage”, International Journal of Production Research, 51(19), pp. 5771-5788.

Erkoyuncu, J.A., Durugbo, C. and Roy, R. (2013) “Identifying uncertainties for industrial service delivery: a systems approach”, International Journal of Production Research, 51(21), pp. 6295-6315.
Roy, R., Shaw., Erkoyuncu, J.A., Redding, L.,(2013)  Through-Life Engineering Services, Measurement and Control, 46(6), pp. 172 –175.

Erkoyuncu ,J. A., Roy, R., Shehab, E., Kutsch, E. (2013) “An Innovative Uncertainty Management Framework to Support Contracting for Product-Service Availability”, Journal of Service Management, Special Issue: Complex Engineering, 25(5), pp. 603 - 638.

Conferences:
Duarte Rodrigues, John Erkoyuncu, Andrew Starr, Steve Wilding, Alan Dibble, Martin Laity, Review of the Modelling Approaches for Availability Contracts in the Military Context, Procedia CIRP, Volume 30, 2015, Pages 451-456, ISSN 2212-8271, http://dx.doi.org/10.1016/j.procir.2015.02.132.
(http://www.sciencedirect.com/science/article/pii/S221282711500445X)

Duarte Rodrigues, John Erkoyuncu, Andrew Starr, Steve Wilding, Alan Dibble, Martin Laity, Review of the Modelling Approaches for Availability Contracts in the Military Context, Procedia CIRP, Volume 30, 2015, Pages 451-456, ISSN 2212-8271, http://dx.doi.org/10.1016/j.procir.2015.02.132. (http://www.sciencedirect.com/science/article/pii/S221282711500445X)

Schwabe, O., Erkoyuncu, J.A., Shehab, E. (2014) “Long tail uncertainty distributions in novel risk probability classification”, Procedia CIRP, Vol. 28, pp. 191-196, 3rd CIRP Global Web Conference – Production Engineering Research — Advancement beyond state of the art (CIRPe2014), Retrieved August 19th, 2015 from http://www.sciencedirect.com/science/article/pii/S2212827115002954

Schwabe, O., Shehab, E., Erkoyuncu, J. (2015) "Geometric Quantification of Cost Uncertainty Propagation: A Case Study", Procedia CIRP, Vol. 37, 2015, pp.158-163, CIRPe 2015 - Understanding the life cycle implications of manufacturing, Retrieved October 13th, 2015 from http://www.sciencedirect.com/science/article/pii/S2212827115009324

Busachi, A., Erkoyuncu J., Colegrove P., Filomeno Martina, and Jialuo Ding. “Designing a WAAM Based Manufacturing System for Defence Applications.” Procedia CIRP 37 (2015): PP. 48–53. doi:10.1016/j.procir.2015.08.085.

Sabaei, D., Erkoyuncu, J. & Roy, R. (2015a). Positioning of Spare Part Contracts in the Servitisation Process. Procedia CIRP. 38. pp. 106–111. Available from: http://www.sciencedirect.com/science/article/pii/S2212827115008859.

Sabaei, D., Erkoyuncu, J. & Roy, R. (2015b). A Review of Multi-criteria Decision Making Methods for Enhanced Maintenance Delivery. Procedia CIRP. 37. pp. 30–35. Available from: http://www.sciencedirect.com/science/article/pii/S2212827115009403.

Books:
Erkoyuncu, J.A., Roy, R, (2014) “Obsolescence Management”, Decision Engineering, Rajkumar Roy and Louis Redding (Eds): Through-life Engineering Services, 978-3-319-12110-9, 318508_1_En (17)

Steenstra D., Erkoyuncu, J.A., 2014, Chapter 7, M. Ma et al. (eds.), Virtual, Augmented Reality and Serious Games for Healthcare 1, Intelligent Systems Reference Library 68, DOI: 10.1007/978-3-642-54816-1_7

Project: Self-healing Technologies for Electronic and Mechanical Components and Subsystems
Journals:
R. McWilliam, P. Schiefer, and A. Purvis, “Creating self-configuring logic with built-in resilience to multiple-upset events,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, published online Oct. 2015 doi: 10.1177/0954405415611607.

McWilliam, R., Schiefer P., Purvis. A., Tiwari, A., “Designing self-maintenance into electronics: a survey of hardware techniques”, ACM Computing Surveys (Under review).

P. Schiefer, R. McWilliam, A. Purvis “Design and analysis of redundant transistor logic gates with combined stuck-at fault resilience and built-in detection”, (In prep to Electronics Letters).

Conferences:
A. Purvis, B. Morris, and R. McWilliam, “FlightGear as a Tool for Real Time Fault-injection, Detection and Self-repair,” Procedia CIRP, vol. 38, pp. 283–288, 2015.

R. McWilliam, P. Schiefer, and A. Purvis, “Experimental Validation of a Resilient Electronic Logic Design with Autonomous Fault Discrimination/Masking,” Procedia CIRP, vol. 38, pp. 265–270, 2015.

T. E. Carney, R. P. McWilliam, and A. Purvis, “Modelling Electronic Circuit Failures using a Xilinx FPGA System,” Procedia CIRP, vol. 38, pp. 277–282, 2015.

Project: The Degradation of Linear Machines
Journals:
L. Kirkwood, E. Shehab, P. Baguley. Cost analysis of innovative maintenance of distributed high-value assets. (Submitted to CIRP Journal of Manufacturing Science and Technology - Special issue on Advanced Methods and Tools for Through-Life Engineering Services)

Conference:
C. Turner, A. Tiwari, A. Starr, Durazo-Cardenas, A. and K. Blacktop, (2015) An Intelligent Framework and Prototype for Autonomous Maintenance Planning in the Rail Industry, International Conference on Vehicle Technology and Intelligent Transport Systems, 20-22 May 2015, Lisbon, Portugal.

Isidro Durazo-Cardenas, Andrew Starr, Chris Turner, Leigh Kirkwood, Maurizio Bevilacqua, Paul Baguley, Essam Shehab “An Intelligent Maintenance System For The Rail: Integrating Condition, Planning And Cost” Railway Engineering 2015, Edinburgh

L. Kirkwood, E. Shehab, P. Baguley, A. Starr. “Uncertainty of Net Present Value calculations and the impact on applying integrated maintenance approaches to the UK rail industry” Procedia CIRP   Proceedings of the 4th International Conference in Through-life Engineering Services, 38, 2015, pp 245-249

MSc Theses:
Uncertainty modelling for cost-risk of maintenance of high value assets. Laurent Carlander; MSc thesis. Cranfield University (2015)

Analysis of infrastructure options and the cost implications at Network Rail. Lorenzo Giuntini. MSc thesis. Cranfield University (2015)

Autonomous maintenance operations sequencing. Z. Zhu. MSc thesis. Cranfield University (2015)

Data for asset utilisation in railways. C. Amaraegbeni. MSc thesis. Cranfield University (2015)

Modelling an application for intelligent autonomous scheduling for rail maintenance.
P.T. Ravi. MSc thesis. Cranfield University (2015)

A user interface for rail maintenance planning and scheduling. T. Huang. MSc thesis. Cranfield University (2015)

Project: Autonomous Maintenance
Patents
T. Tomiyama (there can be two more student inventors), Robotic Seat Cleaning Apparatus, UK patent pending 1519001.0, 27 October 2015.

Project: Mind Palace
Journal papers
Mourtzis D., Vlachou E., Milas N., Tapoglou N., Mehnen J., “A Cloud-based knowledge enriched framework for machining efficiency based on machine tool monitoring” International Journal of Advanced Manufacturing Technology, (Submitted 2015).

Tapoglou N., Mehnen J., Butans J. “Energy efficient machining through on-line optimization of cutting conditions in CNC-milling” Journal of Cleaner Production, (Submitted 2015).

Tapoglou N., Mehnen J., Vlachou A., Doukas M., Milas N., Mourtzis D. (2015) “Cloud based platform for optimal machining parameter selection based on function blocks and real time monitoring”, Journal of Manufacturing Science and Engineering, Transactions of the ASME, Vol. 137(4), pp. 040909-040909-11, doi:10.1115/1.4029806.

Conferences
Tedeschi S., Mehnen J., Tapoglou N., Roy R. “Security aspects in Cloud based condition monitoring of machine tools”, 4th International Through-life Engineering Services Conference, 3rd – 4th November 2015, Cranfield, UK, Procedia CIRP, Vol. 38 (2015), pp. 47-52, doi:10.1016/j.procir.2015.07.046.

Tapoglou N., Mehnen J. “A Framework for Cloud Manufacturing Enabled Optimisation for Machining”, APMS 2015 International conference Advances in production management systems, 5th – 9th September 2015, Tokyo, Japan, Advances in Production Management Systems: Innovative Production Management Towards Sustainable Growth (2015), Chapter 42, pp.363-370, doi: 10.1007/978-3-319-22759-7_42.

Tapoglou N., Mehnen J., Butans J., Morar N.I. “Online on-board optimization of cutting parameter for energy efficient CNC milling” 13th Global Conference on Sustainable Manufacturing, GCSM 2015, Ho Chi Minh City / Binh Duong, Vietnam on 16th – 18th September, 2015, (in print).

Tapoglou N., Mehnen J. “Cloud-Based Job Dispatching Using Multi-Criteria Decision Making” 48th CIRP Conference on Manufacturing Systems - CIRP CMS 2015, 24 - 26 June 2015, Ischia, Italy (in print).

Tapoglou N., Mehnen J., Doukas M., Mourtzis D. “Optimal Machining Parameter Selection Based On Real-Time Machine Monitoring Using IEC 61499 Function Blocks for Use in A Cloud Manufacturing Environment: A Case Study for Face Milling” ASME 2014 Manufacturing Science and Engineering Conference, Detroit, USA, 9-13 June 2014, doi:10.1115/MSEC2014-4022, ISBN: 978-0-7918-4580-6.